PolymerSafe 1000 Antimicrobial Powder
(Substitute for HM4100 Antimicrobial, Saniconcentrate, Silver Ion)
CAS#: 199111-50-7
Process Temperature: ≤300℃
Dosage: 0.1%-1% (preferably 0.2%-0.5%)
Applications: All kinds of Polymer, Plastic, Master batch , PU Foam
Manufacturer: FandaChem
Application
All kinds of Plastic Master batch
non-woven fabrics
PU foam
TPU- Thermoplastic Polyurethane
Resins
Rubbers
water-based and dry powder paint
Features
Non-toxic;
Non-leaching;
Permanent Antimicrobial;
No Heavy metal;
Low Dosage;
More cost-effective than Silver Ion;
Avoids discoloration;
Price of PolymerSafe 1000 Antimicrobial: Depends on quantity.
Synonyms: PolymerSafe 1000 Antimicrobial for Long-Lasting Antiviral Polymers,PolymerSafe 1000 Antimicrobial for Durable Antiviral Polymers,PolymerSafe 1000 Antimicrobial for Long-Lasting Antimicrobial Polymers,PolymerSafe 1000 Antimicrobial for Durable Antimicrobial Polymers,PolymerSafe 1000 Antimicrobial for infill for artificial sports turf,PolymerSafe 1000 Antimicrobial for infill for artificial sports grass,Polymer disinectant-PolymerSafe 1000 Antimicrobial,resin disinfectant-PolymerSafe 1000 Antimicrobial,Plastic disinfectant-PolymerSafe 1000 Antimicrobial,long lasting disinfectant for plastic-PolymerSafe 1000 Antimicrobial,long lasting disinfectant for resin-PolymerSafe 1000 Antimicrobial,long lasting disinfectant for polymer-PolymerSafe 1000 Antimicrobial,PolymerSafe 1000 Antimicrobial for sale,buy PolymerSafe 1000 Antimicrobial,ultimate solution for Antimicrobial Plastic,ultimate solution for Antimicrobial Polymer,ultimate solution for Antimicrobial Resin,PolymerSafe 1000 Antimicrobial for Antimicrobial Food Packaging,PolymerSafe 1000 Antimicrobial for antimicrobial Plastic Food Wrap,Antimicrobial Additives for Plastics,PolymerSafe 1000 Antimicrobial for antimicrobial Plastic Food Wrap,HM4100 Antimicrobial Equivalent,HM4100 Antimicrobial analogue,HM 4100 Antimicrobial Equivalent,PolymerSafe 1000 Antimicrobial used for Durable Antimicrobial Masterbatch,PolymerSafe 1000 Antimicrobial for Antimicrobial PP,PolymerSafe 1000 Antimicrobial for Antimicrobial PU,PolymerSafe 1000 Antimicrobial for Antimicrobial PET,PolymerSafe 1000 Antimicrobial for Antimicrobial PE,PolymerSafe 1000 Antimicrobial for Antimicrobial PS,PolymerSafe 1000 Antimicrobial for Antimicrobial PA,PolymerSafe 1000 Antimicrobial for Antimicrobial PVC,PolymerSafe 1000 Antimicrobial for Antimicrobial ABS,PolymerSafe 1000 Antimicrobial for Antimicrobial PMMA,Saniconcentrate -PolymerSafe 1000 Antimicrobial analogue,antimicrobial plastic additive,PolymerSafe 1000 Antimicrobial for Antimicrobial and Antiviral Plastics,PolymerSafe 1000 Antimicrobial for Antimicrobial protection for flexible films,PolymerSafe 1000 Antimicrobial for antimicrobial polypropylene films,PolymerSafe 1000 Antimicrobial for Anti-Bacterial Film,PolymerSafe 1000 Antimicrobial for Antimicrobial Film,HM4100 Antimicrobial Substitute,Saniconcentrates antimicrobial substitute,Saniconcentrates antimicrobial analogue,PolymerSafe 1000 Antimicrobial for Antimicrobial Masterbatches,Biosafe hm4100 antimicrobial for Antimicrobial Masterbatches,Saniconcentrate Antimicrobial for Antimicrobial Masterbatches,PolymerSafe 1000 Antimicrobial for Antiviral Plastics,PolymerSafe 1000 Antimicrobial for Antimicrobial Masterbatch,hm4100 Antimicrobial for Antiviral Plastics,hm4100 Antimicrobial for Antimicrobial Masterbatch,Saniconcentrate Antimicrobial for Antiviral Plastics,Saniconcentrate Antimicrobial for Antimicrobial Masterbatch,PolymerSafe 1000 Antimicrobial -Antimicrobial Plastic Additives,PolymerSafe 1000 Antimicrobial -Antimicrobial Polymer Additives,PolymerSafe 1000 Antimicrobial -Antimicrobial Additives for Plastics,PolymerSafe 1000 Antimicrobial -Antimicrobial Additives for Polymers,PolymerSafe 1000 Antimicrobial -Antimicrobial Protection for Plastic,PolymerSafe 1000 Antimicrobial -Antimicrobial additives for thermoplastics,,PolymerSafe 1000 Antimicrobial -Antimicrobial additives for engineering plastics,PolymerSafe 1000 Antimicrobial -antimicrobial coating for plastic,PolymerSafe 1000 Antimicrobial for antimicrobial polyolefins,PolymerSafe 1000 Antimicrobial -Antifungal additives for plastics,PolymerSafe 1000 Antimicrobial for Antimicrobial plastic film,PolymerSafe 1000 Antimicrobial (cas 199111-50-7) for Plastic & Polymer,199111-50-7 Powder for Polyer,199111-50-7 Powder for Plastic,199111-50-7 Powder for Masterbatch,199111-50-7 Powder for Resin,Polymeric Antimicrobial Powder,PolymerSafe 1000 Antimicrobial for Polymer & Plastic (Process Temp ≤300℃),PolymerSafe 1000 Antimicrobial for Masterbatch (Process Temp ≤300℃),HM4100 antimicrobial (Process temperature 170℃ max),HM4100 antimicrobial substitute in China,199111-50-7 Powder (Methanol-free),199111-50-7 Powder for Antimicrobial PP,199111-50-7 Powder for for Antimicrobial PU,199111-50-7 Powder for for Antimicrobial PET,199111-50-7 Powder for for Antimicrobial PE,199111-50-7 Powder for for Antimicrobial PS,199111-50-7 Powder for for Antimicrobial PA,199111-50-7 Powder for for Antimicrobial PVC,199111-50-7 Powder for for Antimicrobial ABS,199111-50-7 Powder for for Antimicrobial PMMA,Permanent Antimicrobial Masterbatch,PolyFusion with HM 4100 Antimicrobial,SafeTouch with HM4100 Antimicrobial,Antimicrobial Thermoplastic Urethane (TPU),PolymerSafe 1000 for Antimicrobial Thermoplastic Urethane (TPU),PolymerSafe 1000 for Antimicrobial Plastic Masterbatches,Substitute for Saniconcentrate,Antibacterial polymer fibres (PolymerSafe 1000),Antibacterial polymer fibre (PolymerSafe 1000),antimicrobial masterbatch (PolymerSafe 1000),anti-microbial masterbatches (PolymerSafe 1000),anti-microbial masterbatch (PolymerSafe 1000),antimicrobial PLA nonwoven (PolymerSafe 1000),antimicrobial PP nonwoven (PolymerSafe 1000),Antimicrobial Polyurethane Foam (PolymerSafe 1000),Anti-Bacterial PVC Wall Cladding (PolymerSafe 1000),Antimicrobial PVC Wall Cladding (PolymerSafe 1000),Antimicrobial Wall Cladding (PolymerSafe 1000),PVC Hygienic Wall Cladding (PolymerSafe 1000),hygienic PVC wall cladding (PolymerSafe 1000),Antimicrobial Wall Cladding (PolymerSafe 1000),Antimicrobial PVC Wall Cladding (PolymerSafe 1000),Antimicrobial PVC Panels (PolymerSafe 1000),Anti-Bacterial PVC Wall Cladding,Antimicrobial PVC Wall Cladding,Antimicrobial Wall Cladding,PVC Hygienic Wall Cladding,hygienic PVC wall cladding,Antimicrobial Wall Cladding,Antimicrobial PVC Wall Cladding,Antimicrobial PVC Panels,PolymerSafe 1000 Powder,PolymerSafe 1000 antimicrobial powder,replacement of silver antimicrobial,substitute for silver ion,replacement of antimicrobial silver,Antimicrobial plastic toys with PolymerSafe 1000 Antimicrobial,Antimicrobial plastic toys,Antifungal LDPE films for active packaging,Antibacterial LDPE films for active packaging,Antibacterial LDPE films,Antifungal LDPE films,Antifungal plastics,Antibacterial Children's Toys,Antimicrobial Children's Toysantimicrobial plastic toys,Antibacterial plastic toys,PolymerSafe 1000 antimicrobial for Antibacterial toys,PolymerSafe 1000 antimicrobial for Antibacterial Children's Toys,PolymerSafe 1000 antimicrobial for Antibacterial Children's Toys,Antibacterial Toys for Children,Antifungal Packaging Film,Antimicrobial packaging films,Antimicrobial active packing films,Antifungal PVC film,Bactericidal PVC film,Antimicrobial PVC film,Antibacterial PVC film,
Resin Blending and Compounding
The polymeric antimicrobial powder PolymerSafe 1000 Antimicrobial can be dry blended into the bulk resin by any variety of standard mixing operations. The powder will adhere to the surface of the bulk resin particles and become homogeneously mixed. Following mixing the PolymerSafe 1000 Antimicrobial into the host resin, it is ready for molding, extrusion, or other thermoplastic processes to make the nished good. Care should be taken to keep this mixture in a dry environment. In certain resins it is recommended that the mixture be dried before it is used.
Resin Compatibility
TPU- ermoplastic Polyurethane
Urethane Foam
Polyether block amide (PEBAX®)
Polyamide 6 (PA6 or nylon 6)
Silicone (not post-cured)
Acrylic (cast and thermoplastic)
Acrylic adhesives
Spun ber (PA6, PE, PP)
Fiberglass Gel Coat
Loading Level
Dependent upon the nished goods requirement for ecacy, one can use between 1 part per thousand to 10 parts per thousand of PolymerSafe 1000 Antimicrobial to base resin by weight (0.1%- 1%). PolymerSafe 1000 Antimicrobial is dispersed throughout the polymer matrix via blending followed by polymer processing (i.e. thermoplastic, thermoset, etc.)
Process Temperature
A process temperature of<300 °C is preferred, but it is time, temperature, and aerobic dependent.
STORAGE AND DISPOSAL
Do not contaminate water, food, or feed by storage or disposal.
STORAGE: Store in original, tightly closed container in an area inaccessible to children and away from food or feed. PolymerSafe 1000 Antimicrobial is moisture sensitive. Keep tightly closed until ready to use. Reclose tightly after each use. When stored in original, unopened containers at or below 25°C (77°F), PolymerSafe 1000 Antimicrobial has a minimum shelf life of 24 months from the date of shipment.
PESTICIDE DISPOSAL: Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA
Regional Office for guidance.
CONTAINER HANDLING:
For containers less than or equal to 5 gallons: Non-Refillable Container. Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container ¼ full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill or by incineration.
For containers greater than 5 gallons: Non-Refillable Container.
Do not reuse or refill this container. Triple rinse container (or equivalent) promptly after emptying. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container ¼ full with water. Recap and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Turn the container over onto its other end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat this procedure two more times. Then offer for recycling if available or puncture and dispose of in a sanitary landfill, or by incineration.
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION: Causes moderate eye irritation. Avoid contact with eyes or clothing. Wear goggles or safety glasses. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.
ENVIRONMENTAL HAZARDS
This pesticide is toxic to fish and aquatic invertebrates. Do not discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment plant authority. For guidance contact your State Water Board or Regional Office of the EPA.
Every effort should be made to contain accidental spills of powder to the immediate area. Many spills may be cleaned up alone or with sand or absorbent materials by sweeping and collection in a waste bin. The material may then be disposed of by incineration or landfill.
Inactivation of solutions containing PolymerSafe 1000 Antimicrobial may be accomplished by addition of an anionic surfactant, or detergent in quantity equivalent to that of PolymerSafe 1000 Antimicrobial in solution.
PRODUCT FEATURES AND BENEFITS
PolymerSafe 1000 Antimicrobial imparts durable biostatic activity to the surface of a wide variety of substrates.
PolymerSafe 1000 Antimicrobial is effective against mold, mildew and algae as a static agent.
Increased efficiency – through proper application, durable bacteriostatic, fungistatic and algistatic surfaces can be attained with a minimum amount of PolymerSafe 1000 Antimicrobial.
Provides freshness and combats deterioration and discoloration caused by bacteria, fungi and algae.
DIRECTIONS FOR USE:
It is a violation of Federal Law to use this product in a manner inconsistent with
its label.
FOR USE AS AN ANTIMICROBIAL UNDER EPA REGULATIONS
FOR COMMERCIAL APPLICATIONS IN HOMES, OFFICES, AUTOMOBILES AND INSTITUTIONS AND FOR INDUSTRIAL USE ONLY. This product is registered as a microbiostatic agent for material preservation; neither this product nor the articles treated with this product may state or imply any public health claims. Articles or substances treated with this product will be exempt from FIFRA regulation pursuant to 40 CFR 152.25(a) if the intended use for incorporating this material into a treated article or substance is for the protection of the article or substance itself.
APPROVED USES: PolymerSafe 1000 Antimicrobial may be applied to or incorporated into manufactured products listed below for use in industrial, institutional, commercial or residential locations for non-food contact uses
Plastics, fiberglass, metals, glass, wood, ceramics, stone, sand, natural materials, composites: Including air filters for furnaces, air conditioners, air purification devices, automobiles, and recirculating air handling systems; aquarium filters; automotive and vehicular parts; roofing materials (tiles, shakes, shingles, granules, stone, membranes, felt, underlayment and synthetic overcoats); building materials and components (including siding, wallboard, wood and wood composites, insulation and non-food contact cabinetry); ceiling tiles; concrete products; paints and coatings, thin films, mastics and sealants, cementitious materials (including caulk, grout and cement and grout premixes); non-food contact conveyor and humidifier belts; non-food contact countertops; fiberglass ductboard for air handling systems; floor covering; flooring; general purpose (non-food contact) containers; furniture; bathroom and non-food contact kitchen hardware; mats; plumbing supplies and fixtures; sheet and formed glass;
silica sand (for use in swimming pool filters).
Fibers, fabrics (natural and synthetic, woven and non-woven), leather and household materials (natural and synthetic): Including buffer pads (abrasive and polishing); mattress cover pads, filling and ticking; pillow covers; sheets; blankets; bedspreads; fiberfill for upholstery, apparel, recreational gear, quilts and pillows; curtains; draperies; carpet and carpet underlay; rugs; upholstery; towels; shower curtains; toilet tank and seat covers; wall covering fabrics and wallpaper (including vinyl) for non-food contact surfaces; umbrellas; fire hose fabric; non-woven disposable diapers; wiping cloths; pre-moistened towelettes and tissue wipes (these do not impart pesticidal properties); apparel including outerwear, sportswear, sleepwear, socks, hosiery, undergarments, gloves anduniforms; footwear (boots, shoes and components); sports equipment and athletic gear; cloth for sails, ropes, tents and other outdoor equipment; sand bags; tarps; awnings; book covers; pictures.
HOW TO USE:
MSDS INFORMATION: BEFORE HANDLING, READ PRODUCT AND SAFETY
DATA SHEET AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND
HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET CAN BE
OBTAINED BY WRITING TO Hangzhou Fanda Chemical Co.,Ltd OR BY CALLING
+86-15858145714. A SAFETY DATA SHEET FOR A TYPICAL USE DILUTION
AQUEOUS SOLUTION IS ALSO AVAILABLE.
Wear goggles or face shield, protective clothing, and rubber gloves when handling the material. Use with proper ventilation.
*FOR USE AS AN ANTIMICROBIAL TO PRESERVE FINISHED FOOD CONTACT ARTICLES SUBJECT TO FDA REGULATIONS
Use: Food contact coatings, films and laminates
Products: Appliances and equipment, barrier fabrics, building materials and components, collection and storage equipment (such as conveyor belts, piping systems, silos, tanks and process vessels), cookware, countertops, food wrap (including coated deli paper, coated meat interleavers and plastic wrap), general purpose containers, glazing for cement tile, glazing for vitreous china used in plumbing fixtures (such as sinks and countertops), industrial equipment, natural and synthetic fibers and fabrics, packaging, paper products (such as wipes, tissues, wall coverings, towels), plastic film, sinks
Maximum Concentration: 1% weight percent of the resin, laminate, or coating.
Polymeric tubing for the transfer of beverages. The FCS may be used at a maximum use level of 1 percent of the finished tubing.
Use: Food contact molded plastic parts
Products: Beverage dispensing equipment tubing, beverage processing equipment tubing
Maximum Concentration: 1% weight percent of the finished tubing
Repeat use activated carbon water filters. The FCS may be used at a maximum use level of 0.25 weight percent of the carbon block.
Use: Water filter
Products: Activated carbon water filters
Maximum Concentration: 0.25% weight percent of the carbon block
PolymerSafe 1000 Antimicrobial renders compounds inherently antimicrobial. The organosilicon technology is more cost-effective and faster acting than silver-based additives, avoids discoloration, and is non-leaching.
This new antimicrobial protects plastics from staining and degradation caused by bacteria, mold, mildew, and fungi. PolymerSafe 1000 Antimicrobial does not migrate, diffuse, or leach out of the protected plastic.
The antimicrobial component of PolymerSafe 1000 kills microorganisms by effectively puncturing and rupturing the organisms'cell wall. By comparison, conventional antimicrobials kill by leaching into the cell, where they are metabolized and interfere with critical life processes. This conventional mode of action has been shown to cause microorganisms to mutate and adapt, becoming resistant to the antimicrobial.
PolymerSafe 1000 Antimicrobial protects materials used in a wide range of consumer and industrial applications where microorganisms can cause staining, pitting, deterioration, or foul odors. PolymerSafe 1000 Antimicrobial solves microbial problems in these end uses:
HEALTHCARE
Protects medical devices and surfaces in healthcare environments. The spread of infection in hospitals and the development of antibiotic-resistant bacterial strains is nationally recognized as a critical healthcare problem, one that PolymerSafe 1000 Antimicrobial can help solve through its use in catheters, wound dressings, and high-contact environmental surfaces such as door knobs and counter tops.
BUILDING PRODUCTS
The heat and moisture to which siding, flooring, roofing, decks, and other components are exposed promote the growth of molds and mildews. According to the insurance industry, mold-related damage to building products causes well over an estimated $2-billion in claims per year.
SPORTING GOODS
Whether its playing sports and adventuring outdoors, gear gets wet and stays damp. This is when microbes can proliferate and cause odors and staining. With built-in protection from PolymerSafe 1000 Antimicrobial, mold, mildew and bacteria never have a chance to get a foothold and multiply. The equipment stays cleaner longer, and free of unwanted odors.